Lineární vedení Schneeberger MINIRAIL - EN

82 16 Installation and Adjustment Guidelines for MINIRAIL and MINISCALE PLUS Relubrication intervals The relubrication interval depends on many variables, e.g. load, working environ- ment, speed, etc. and therefore cannot be calculated. The lubrication point must therefore be observed over a longer period of time. A) Relubrication with oil A relubrication set with KLÜBER Structovis GHD can be ordered  from SCHNEEBERGER, part number MNW. The two lubrication holes in the front plates allow the ball recirculation pathways to be lubricated with oil directly (see chapter 7.1.8). Ensure both tracks are properly lubricated. During lubrication, the carriages should be moved along the entire length of the rail so that the lubricant is applied to both the carriage and guideway. B) Relubrication with grease The tracks of the guideway should be coated in a thin film of grease using a lint-free cloth. The carriages should then be moved along the entire length of the rail so that the lubricant is applied to the ball bearings and distributed along the guideway. 16.3.4 Lubrication of MINISCALE PLUS Please refer to the MINISCALE PLUS mounting instructions in the download section of www.schneeberger.com Relubrication set (MNW), contents 7 ml