Lineární vedení Schneeberger MINIRAIL - EN

83 16 Installation and Adjustment Guidelines for MINIRAIL and MINISCALE PLUS 16.3 / 16.4 Installation and Adjustment Guidelines 16.4 Installation 16.4.1 General • Before installation, the guideway, machine bed, mounting plate and fastening screws must all be at room temperature • Always tighten the fastening screws with a torque wrench. See chapter 16.5 for torque values • Always press the reference surface of the guideway against the reference surface of the machine bed. The guideway can be located on both sides, the reference side of the carriage is opposite the carriage side with the company logo / type designation 16.4.2 MINIRAIL and MINISCALE PLUS • Alternate between sides of the guideway, starting at the middle, when tightening fastening screws. Pay attention to guideways on multi-part MINIRAIL systems (chapter 8.2) 16.4.3 MINIRAIL A protective plastic guideway is included on delivery (matched deliveries are the exception). The carriages should be transferred directly from the protective plastic guideway onto the steel guideway. This prevents dirt from getting into the carriages or the carriages from tilting which could lead to the loss of ball bearings. Fixing MINIRAIL guideways correctly Carriage on the protective plastic guideway before being transferred onto the steel guideway