Řetězy Donghua - produktový katalog 2017

Lc L t b 1 d 1 d 2 T Lc P h 2 P *套筒链：表中滚子直径d 1 为套筒直径 *Bush chain: d 1 in the table indicates the external diameter of the bush # 直链板 # Straight side plates 注意：上述规格的双排链和叁排链、双节距输送链系列依照要求也适合镀达克罗 Note: Duplex & Triplex dacromet－plated chains are available in all sizes Double pitch dacromet－plated conveyor chains are available upon request * 25DR * 35DR 41DR 40DR 50DR 60DR 80DR 100DR 120DR 140DR 160DR 04BDR 05BDR # 06BDR 08BDR 10BDR 12BDR 16BDR 20BDR 24BDR 28BDR 32BDR Pitch Pin length Width between inner plates Pin diameter Inner plate depth Plate thickness Breaking load Weight per meter Roller diameter mm P mm mm mm mm mm mm mm kN/lbf h 2 max Lc max L max t/T max d 2 max b 1 min d 1 max kg/m q 6.350 9.525 12.700 12.700 15.875 19.050 25.400 31.750 38.100 44.450 50.800 6.000 8.000 9.525 12.700 15.875 19.050 25.400 31.750 38.100 44.450 50.800 3.30 5.08 7.77 7.95 10.16 11.91 15.88 19.05 22.23 25.40 28.58 4.00 5.00 6.35 8.51 10.16 12.07 15.88 19.05 25.40 27.94 29.21 3.18 4.77 6.25 7.85 9.40 12.57 15.75 18.90 25.22 25.22 31.55 2.80 3.00 5.72 7.75 9.65 11.68 17.02 19.56 25.40 30.99 30.99 2.31 3.58 3.58 3.96 5.08 5.94 7.92 9.53 11.10 12.70 14.27 1.85 2.31 3.28 4.45 5.08 5.72 8.28 10.19 14.63 15.90 17.81 7.90 12.40 13.75 16.60 20.70 25.90 32.70 40.40 50.30 54.40 64.80 6.80 8.20 13.15 16.70 19.50 22.50 36.10 41.30 53.40 65.10 66.00 8.40 13.17 15.00 17.80 22.20 27.70 35.00 44.70 54.30 59.00 69.60 7.80 8.90 14.10 18.20 20.90 24.20 37.40 45.00 57.80 69.50 71.00 6.00 9.00 9.91 12.00 15.09 18.00 24.00 30.00 35.70 41.00 47.80 5.00 7.10 8.20 11.80 14.70 16.00 21.00 26.40 33.20 36.70 42.00 0.80 1.30 1.30 1.50 2.03 2.42 3.25 4.00 4.80 5.60 6.40 0.60 0.80 1.30 1.60 1.70 1.85 4.15/3.1 4.5/3.5 6.0/4.8 7.5/6.0 7.0/6.0 0.15 0.33 0.41 0.62 1.02 1.50 2.60 3.91 5.62 7.50 10.10 0.11 0.20 0.41 0.69 0.93 1.15 2.71 3.70 7.10 8.50 10.25 3.50/795 7.90/1795 6.67/1516 14.10/3205 22.20/5045 31.80/7227 56.70/12886 88.50/20114 127.00/28864 172.40/39182 226.80/51545 3.00/682 5.00/1136 9.00/2045 18.00/4091 22.40/5091 29.00/6591 60.00/13636 95.00/21591 160.00/36364 200.00/45455 250.00/56818 Q 东华链号 Donghua Chain No. 节距 内链板高度 链板厚度 销轴直径 销轴长度 破断载荷 每米长重 滚子直径 内节内宽 达克罗链条适合于有腐蚀性的场合 Dacromet-plated chains are suitable for corrosive conditions 镀达克罗链 Corrosion resistant/Dacromet-plated chains www.dhchain.com 27 东华链条集团 DONGHUA CHAIN GROUP