XMS – the item machine cabins 2

4 5 6 130 Dimensions Description of the product geometry. External dimensions are indicated without any letter prefixes. If a letter prefix is present, this indicates a special type of geometry: U: The product has a U shape M: Metric thread D: Lid (“Deckel” in German) In order to differentiate between similar products in the same product line, the geometry is described further after the generic external dimensions. 2N/4N 90°/2N 180° in relation to profiles Similar profiles are differentiated by a suffix that indicates the number of closed grooves: 2N: 2 grooves are closed on one side of the profile 4N 90°: 4 grooves are closed on two sides of the profile that meet at 90° 2N 180°: 2 grooves are closed on opposite sides of the profile 45°/90°/180° in relation to other products When angles are stated for other products, they refer to special features of the product geometry. These could be chamfers or other angle types of certain geometries. Additional information such as “D80” after the geometry identifiers provide clarity. For example, a U-shaped 80x40 profile could be open on the 40 side or 80 side. The suffix “D80” indicates that this geometry requires a lid (“Deckel” in German) because the 80 mm-wide side is open. Material The material is stated separately when a product is available in different materials or is usually manufactured in a different material. For example, Caps are usually made of plastic, so when a different material is used, this is stated in the article name. Al: Aluminium K: Plastic (“Kunststoff” in German) Zn: Zinc Other properties Products that cannot be clearly described based on the above-mentioned properties are defined here XMS: These products exhibit features from the XMS system. They have an internal cable conduit and/or a special groove for the XMS seal system. 180°: The two special grooves for Lip Seals are on opposite sides K15: 15 mm-wide internal cable conduit (“Kabelkanal” in German) T1: Door rabbet (“Türanschlag” in German) for one door T2: Door rabbet for two doors 4-5 mm: Suitable for accommodating panels that are 4-5 mm thick M16: Can be used only with feet that have an M16 thread TECHNICAL DATA