XMS – the item machine cabins 2

34 -JOF 40 40 20 20 40 Angle Bracket Set X 8 40x40 -JOF Angle Bracket X 8 40x40 Zn, die-cast zinc, white aluminium Angle Bracket Cap X 8 40x40, PA-GF, grey 2 Button-Head Screws ISO 7380-M8x18, St, bright zinc-plated 2 washers 13.9x13.9x2 St, bright zinc-plated 2 T-Slot Nuts 8 St M8, bright zinc-plated m = 150.0 g 1 set 0.0.601.62 40 80 20 20 80 40 Angle Bracket Set X 8 80x80 -JOF Angle Bracket X 8 80x80 Zn, die-cast zinc, white aluminium Angle Bracket Cap X 8 80x80, PA-GF, grey 4 Button-Head Screws ISO 7380-M8x18, St, bright zinc-plated 4 washers 13.9x13.9x2 St, bright zinc-plated 4 T-Slot Nuts 8 St M8, bright zinc-plated m = 360.0 g 1 set 0.0.601.61 Angle Bracket X 8 40x40 F < 1,000 N ^ F x l < 50 Nm Angle Bracket X 8 80x80 F < 2,000 N ^ F x l < 150 Nm ■ ■ Reinforcement for profile connections ■ ■ Friction-based connection with no profile machining ■ ■ Can be retrofitted rapidly Angle Bracket Sets X 8 The load-carrying capacity is to be checked to ensure both conditions are met. Angle Bracket Sets X 8 are used to create friction-based fixings between profiles with no need for machining, both as additional reinforcement for profile connections and as an element for fastening any components to profiles. When being used to reinforce connection points on larger profiles, several brackets can be installed in parallel. Note: Please note the maximum permissible tensile load- carrying capacity of the profile groove! Special washers are used with Angle Bracket Sets X 8 due to the screw length and to improve force transmission. BASIC FRAMES