XMS – the item machine cabins 2

SW6 SW5 13,2 39 Automatic-Fastening Sets 8 also have an anti-torsion feature. Once the profile has been preassembled, this feature can be deployed by unscrewing the fastener sufficiently so that the end of it projects into the profile groove. Automatic-Fastening Sets should always be used in pairs. Automatic Fasteners with a double T-Slot Nut are available as complete sets to enable rapid installation in pairs. They make it easier to position the T-Slot Nuts and speed up the installation process. L-Keys from item are the ideal tool for tightening the screws of the Automatic-Fastening Set (tightening torque M). The Fastener is screwed into a profile groove in the end face, the thread being cut automati- cally. Use of a lubricant is recommended. Note: All Fasteners with a through bore for the fastening screw have a counter-clockwise thread on the outside in order to prevent the Fastener twisting when the screw is tightened. Automatic-Fastening Sets ■ ■ No additional profile machining required ■ ■ For a profile connection that is stable and can also be repositioned ■ ■ Outstanding resistance to displacement, torsion and deflection Suitable for universal use, these Fastening Sets create a friction-based connection between any two profiles from the same line. They allow for subsequent adjustment because the fasteners are only screwed into one profile. These Fastening Sets can be installed easily into existing constructions. The profiles do not need to be machined in order to use the Automatic-Fastening Sets. BASIC FRAMES