Joint and Cardan Shafts

0.700 115 114 Technical Description Series 0.700 0.700  Service Phone Europe  + 49 (0) 95 23 / 1 89-0  Service Phone North America  + 1 – 2 6 9 / 6 3 7 7 9 9 9 0.700 Cardan joints and cardan shafts according to DIN 808 are supported by sliding bearings and their use is consequently restricted to low-speed drives. The respective permissible maximum speeds de- pend on the deflection angle and the load, however, they must not exceed 1000 rpm. We strongly recommend to consult our Technical Advice Service in cases of uncertainty. To ensure trouble-free operation, the joints must always be sufficiently lubricated. This may also be done by means of bellows and grease filling. Further information on the use of cardan joints and cardan shafts can be found under “Information on the use” in the Technical Annex, chapter 8. Page 146 provides information on surface refine- ment processes. General technical description of production series 0.700: Max. angle of deflection : 45° Torque range: up to 450 Nm Material: 11SMnPb 30 k Material No. 1.0718 Special material: X 17 CrNi 16-2 Material No. 1.4057 (corrosion- and acid-resistant) For more detailed information please refer to the datasheets which follow.